User Manual of Digital Video Recorder
30
Figure 1. 16 DS-8132HGHI-SH
Figure 1. 17 DS-8100/9000HQHI-SH
Table 1. 12 Description of Front Panel
No. Item Description
1 VIDEO IN
BNC interface for TVI and analog video input.
2
VIDEO OUT
BNC connector for video output.
CVBS output is not provided by DS-7324/7332HGHI-SH and
DS-8124/8132HGHI-SH series.
3 AUDIO IN
RCA connector
4 USB Port
Universal Serial Bus (USB) port for additional devices.
5
HDMI
HDMI video output connector.
DS-8124/8132HGHI-SH provides HDMI1 and HDMI2 interfaces.
6
VGA DB15 connector for VGA output. Display local video output and
menu.
7 AUDIO OUT
RCA connector.
8 Network Interface
Connector for network
9
RS-485 Interface
Connector for RS-485 devices. T+ and T- pins connect to R+ and R-
pins of PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading
devices, the first DVR’s D+, D- pin should be connected with the
D+, D- pin of the next DVR.
Connector for alarm input.
Connector for alarm output.
10 Power Supply
100 ~ 240V AC power supply.
11 Power Switch Switch for turning on/off the device.
12 GND
Ground
13 LINE IN
BNC connector for audio input.
To Next Page
Loading...
Need help?
General
