HIKVISION DS-7100NI-Q1/P Series - Chapter 1 Startup; Activate Your Device

Chapter 1 Startup
1.1 Acvate Your Device
For the rst-me access, you need to acvate the video recorder by seng an admin password. No
operaon is allowed before acvaon. You can also acvate the video recorder via web browser,
SADP or client soware.
Before You Start
Power on your device.
Steps
1. Select a language.
2. Click Apply.
3. Input the same password in Password and
Conrm Password.
Warning
Strong Password recommended-We highly recommend you create a strong password of your
own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case leers, lower case leers, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, reseng the password monthly or weekly can beer
protect your product.
4.
Acvate network camera(s) connected to the device.
-
Check Use the Device Password to use the device password to acvate the inacve network
camera(s).
-
Enter a password in Camera Acvaon Password to acvate network camera(s).
5. Click Acvate.
Figure 1-1
Acvaon
What to do next
Follow the wizard to set basic parameters.
Network Video Recorder User Manual
1