HIKVISION DS-7100NI-Q1/P Series - Isup

6.2.7 ISUP
SDK is based on Intelligent Security Uplink Protocol (ISUP). It provides APIs, library les, and
commands for the third-party
plaorm to access devices such as NVRs, speed domes, DVRs,
network cameras, mobile NVRs, mobile devices, decoding devices, etc. With this protocol, the
third-party plaorm can realize funcons like live view, playback, two-way audio, PTZ control, etc.
Steps
1. Go to
Conguraon → Network → Plaorm Access .
2. Set Type as ISUP.
Figure 6-11 ISUP
3. Turn on Enable.
Note
Enabling ISUP will disable other plaorm access.
4. Set the related parameters.
Server Address
The plaorm server IP address.
Server Port
The plaorm server port, ranges from 1024 to 65535. The actual port shall be provided by
the
plaorm.
Device ID
The Device ID shall be provided by the plaorm.
Version
ISUP protocol version, only V5.0 is available.
Network Video Recorder User Manual
44