HIKVISION DS-7100NI-Q1/P Series - Network Configuration; General; Hik-Connect

5.2 Network Conguraon
5.2.1 General
You shall properly congure the network sengs before operang the device over network.
Steps
1. Go to Conguraon → Network → General .
Figure 5-4 Network
2. Set network parameters.
DHCP
If the DHCP server is available, you can enable DHCP to
automacally obtain an IP address
and other network sengs from that server.
Auto Obtain DNS
If DHCP is enabled. You can enable Auto Obtain DNS to automacally obtain Preferred DNS
Server and Alternate DNS Server.
3. Click Apply.
5.2.2 Hik-Connect
Hik-Connect provides mobile phone applicaon and plaorm service to access and manage your
connected devices, which enables you to get a convenient remote access to the video security
system.
Steps
1. Go to
Conguraon → Network → Hik-Connect .
2. Turn on Enable. The service terms will pop up.
1) Scan the QR code to read the service terms and privacy statement.
Network Video Recorder User Manual
19