HIKVISION DS-7100NI-Q1/P Series - Perimeter Protection

Figure 6-25 Excepons
4. Set the arming schedule. Refer to Congure Arming Schedule for details.
5. Click Apply.
6.4.2 Perimeter
Protecon
Perimeter protecon includes line crossing detecon, intrusion detecon, region entrance
detecon, and region exing detecon.
Note
Perimeter protecon is only available for certain device models or camera models.
Line Crossing Detecon
Line crossing detecon detects people, vehicles, and objects crossing a set virtual line. The
detecon direcon can be set as bidireconal, from le to right or from right to le.
Steps
1. Go to
Conguraon → Event → Smart Event → Line Crossing .
2. Set Camera.
3. Turn on Enable.
4.
Oponal: Check Save VCA Picture to save the captured pictures of VCA detecon.
5. Set the detecon rules and detecon areas.
1) Set Arming Area. Up to 4 arming areas are selectable.
2) Set
Direcon as A<->B, A->B, or A<-B.
A<->B
Network Video Recorder User Manual
59