HIKVISION DS-7100NI-Q1/P Series - Configure Recording Schedule

6. Click to search the available disks.
Figure 5-12 Add NetHDD
7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
8. Click OK. The added NetHDD will be displayed in the storage device list.
5.4.2
Congure Recording Schedule
Video recorder will automacally start/stop recording according to the congured schedule.
Congure
Connuous Recording
Steps
1. Go to Conguraon → Record → Parameter .
2. Set the connuous main stream/sub-stream recording parameters for the camera. Refer to
Congure Recording Parameter for details.
3. Go to Conguraon → Record → Schedule .
4. Select recording type as
Connuous. Refer to Edit Schedule for details.
Congure
Event Recording
You can congure the recording triggered by the moon detecon, line crossing detecon, and
intrusion
detecon.
Steps
1. Go to Conguraon → Event → Smart Event .
2. Congure the event detecon and select the channels to trigger the recording when an event
occurs.
3. Go to
Conguraon → Record → Parameter .
Network Video Recorder User Manual
30