HIKVISION DS-7100NI-Q1/P Series - Page 50

Alarm Pop-up Output
Select the output to show alarm video.
Alarm Pop-up Delay
Set the me to show alarm event image.
Audio
Turn on/o audio output for the selected video output.
Volume
Adjust the live view, playback, and two-way audio volume for the selected video output
interface.
3. Click Apply.
Congure
Live View Layout
Steps
1. Go to Conguraon → System → Live View → View .
2. Set Output Interface.
3. Select a window, and double click a camera the list you would like to display.
means no
camera is displayed on the window.
4.
Oponal: Click or to start or stop live view of all cameras.
5. Click Apply.
Congure
Channel-Zero Encoding
Enable the channel-zero encoding when you need to get a remote view of many channels in real
me from a web browser or CMS (Client Management System) soware, in order to decrease the
bandwidth requirement without
aecng the image quality.
Steps
1. Go to Conguraon → System → Live View → General .
2. Set Video Output Interface as Channel-Zero.
3. Go to
Conguraon → System → Live View → Channel-Zero .
Network Video Recorder User Manual
36