Digital Video Recorder User Manual
138
With the configured VCA detection, the device supports the VCA search for the behavior search, face search, plate
search, people counting and heat map results.
The DS-7100 series DVR do not support the VCA search.
11.1 Face Search
Purpose:
When there are detected face picture captured and saved in HDD, you can enter the Face Search interface to
search the picture and play the picture related video files according to the specified conditions.
Before you start:
Please refer to Section 9.2 Face Detection for configuring the face detection.
Steps:
1. Enter the Face Search interface.
Menu>VCA Search> Face Search
2. Select the camera (s) for the face search.
Figure 11. 1 Face Search
3. Specify the start time and end time for searching the captured face pictures or video files.
4. Upload the pictures from your local storage device for matching the detected face pictures.
5. Set the similarity level for the source pictures and the captured pictures.
6. Click Search to start searching. The search results of face detection pictures are displayed in list or in chart.
To Next Page
Loading...
Need help?
General