Digital Video Recorder User Manual
54
4.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you control the PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
Figure 4. 1 PTZ Settings
2. Choose the camera for PTZ setting in the Camera dropdown list.
3. Click the PTZ Parameters button to set the PTZ parameters.
Figure 4. 2 PTZ- General
4. Select the parameters of the PTZ camera from the dropdown list.
All the parameters should be exactly the same as the PTZ camera parameters.
For the Coaxitron camera/dome connected, you can select the PTZ protocol to HIKVISION-C (Coaxitron). Make
sure the protocol selected here is supported by the connected camera/dome.
To Next Page
Loading...
