Network Video Recorder User Manual
35
Figure 2-21 HDD Management
Step 8 To initialize the HDD, select an HDD and click the Init button. Initialization removes all the
data saved in the HDD.
Step 9 Click Next button to enter the adding IP camera page.
Search: Click Search to search the online IP Camera.
Security: It shows whether it is active or inactive. Before adding the camera, make sure the
IP camera to be added is in active status.
One-touch Activate: If the camera is inactive, you can click the inactive icon of the camera
to set the password to activate it. You can also select multiple cameras from the list and
click the One-touch Activate to activate the cameras in batch.
Add: Select cameras and click Add to add them.
Enable H.265: When you check the checkbox of Enable H.265, the NVR can automatically
switch to the H.265 stream of IP camera (which supports H.265 video format) for the initial
access.
To Next Page
Loading...
Need help?
General
