Fingerprint Access Control Terminal·User Manual
46
2) Press the ESC key and select Yes to save the settings and exit the interface.
Notes: The attendance will not be recorded during the holiday.
6. Press the ESC key and select Yes to save the settings and exit the interface
Note: The department name cannot be edited.
Scheduling Shift by Individual
Adding New Individual Shift
Before you start:
1. Add the user. For detailed information, see Section 4.4 User Management.
2. Configure the normal shift or the man-hour shift. For detailed information, see Section 4.6.2
Configuring Shift.
Steps:
1. Press the key to enter the By Individual (Schedule by Individual) interface.
2. Select New Individual Shift and press the OK key to enter New Individual Shift interface.
3. Select an individual in the list and press the OK key to enter the Individual Shift Settings interface.
To Next Page
Loading...
