Fingerprint Access Control Terminal·User Manual
47
4. Move the cursor to Set Shift and press the OK key to enter the Set Shift interface.
1) Select the shift types and the shift times.
Notes:
You can set the shift from Monday to Sunday.
The shift types include None, Normal, and Man-Hour.
2) Press the ESC key and select Yes to save the settings and exit the interface.
5. Set the start time and the end time in the Individual Shift Settings interface.
6. Select Select Holiday and press the OK key to enter the Select Holiday interface.
1) Select a target holiday.
2) Press the ESC key and select Yes to save the settings and exit the interface.
To Next Page
Loading...
