Tap Sengs → . Enable Wi-Fi, and the indoor staon will search available Wi-Fi automacally.
Note
The Wi-Fi IP can be changed.
Figure 7-11 Wi-Fi Sengs
Select an Wi-Fi and connect.
Set Linked Device IP
Linked network parameters refers to the network parameters of devices (like door staon,
doorphone, main staon, center, etc.), to which the indoor staon is linked. Linked devices for the
indoor staon refers to door staon, center, main staon, and doorphone.
With the private SIP protocol, intercom can be realized only when all these devices are in the same
network segment with the indoor
staon.
Steps
Note
●
The doorphone does not support adding with the standard SIP protocol.
●
Here take main door staon network sengs as example.
1.
Tap Sengs → → Conguraon → to enter the device management page.
Video Intercom Kit User Manual
25