Room Informaon
You can set room name and No. Tap Advanced to set the community No., building No., and
unit No. if you need.
When calling the indoor staon and the two devices are in the same building, you can call the
room No. directly.
Live View Duraon
You can set the duraon of live view.
Registraon Password
You can create a new registraon password.
Enable SIP 1.0
You can enable SIP 1.0 protocol according to your needs.
Analog Doorphone
Sengs
The analog doorphone and sub doorphone share the capacity quanty. You can add maximum 1
doorphone + 14 sub doorphone + 2 analog doorphone to one indoor staon. (If there is no analog
doorphone, you can add 1 doorphone + 16 sub doorphone to one indoor
staon.)
Steps
1.
Tap
Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Tap to enter the device management page.
3.
Tap Analog Doorphone.
4.
Set the name and the unlock
me. Click OK to save the sengs.
Video Intercom Kit User Manual
29