HIKVISION DS-KH8520-WTE1 User Manual

Figure 3-4 Time Sengs Page
Select Time Zone, Enable NTP, Enable DST, or SDK Synchronizaon. Click
Save to save the me sengs.
•
Time Zone: Select a me zone from the drop-down list menu.
•
NTP: Click Enable NTP, and enter the server address, NTP port, and
synchronizaon interval.
Note
The default port No. is 123.
•
DST: Click Enable DST, and set the start me, end me, and bias.
•
SDK
Synchronizaon: Click Synchronizaon, and the system will
synchronize the data to the SDK.
System Maintenance
Click System Maintenance to enter the page.
Video Intercom Indoor
Staon Conguraon Guide
27

HIKVISION DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH8520-WTE1
Category	Intercom System
Language	English