HIKVISION DS-KH8520-WTE1 User Manual

Figure 3-5 System Maintenance
•
Reboot: Click Reboot and the system reboot dialog box pops up. Click
Yes to reboot the system.
•
Restore Default Sengs: Click Restore Default Sengs to restore the
default parameters. All default sengs, excluding network parameters,
will be restored.
•
Restore All: Click Restore All to restore all parameters of device and
reset the device to inacve status.
Note
all default sengs, including network parameters, will be restored. The
device will be reset to inacvated status.
•
Import Conguraon File: Click Import Conguraon File and the import
le window pops up. Select the path of remote conguraon les. Click
Open to import the remote conguraon le. The conguraon le is
imported and the device will reboot automacally.
•
Export Conguraon File: Click Export Conguraon File and the export
le window pops up. Select the saving path of remote conguraon les
and click Save to export the conguraon le.
Video Intercom Indoor
Staon Conguraon Guide
28

HIKVISION DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH8520-WTE1
Category	Intercom System
Language	English