Rail Network Video Recorder User Manual
48
2. Click Apply to save the settings and click OK to exit.
7.2 Camera Settings
Purpose:
You can configure OSD, image, mask, video tamper-proof, motion detection, and video loss parameters.
7.2.1 OSD Settings
Purpose:
You can configure the OSD (On Screen Display) settings which include the display of camera name, date and week,
and the corresponding position information.
Steps:
1. Enter the Camera Settings interface.
Main Menu > Other Settings > Camera
Figure 7. 5 Camera Settings
2. Select the Camera from the drop-down list.
3. Input the Camera Name as desired in the text field.
4. Check the checkboxes of Display Camera Name, Display Date, or Display Week, thus to display camera
name, date, and week in the live view interface for the selected camera.
5. Select the Date Format and Time Format according to the actual needs, and then select the OSD property.
6. To adjust OSD Position, do following steps:
1) Click the OSD Position button
2) Drag the red bar which represents the Date/Time Position and place it in the position according to
your needs.
3) Right click and click to select Camera Name Position item.
4) Drag the red bar which represents the Camera Name Position and place it in the position according to
your needs.
5) Right click and click to select Exit item.
7. Click Apply to save the new settings and click OK to exit.
To Next Page
Loading...
Need help?
General
