Rail Network Video Recorder User Manual
64
2. Select the Hard Disk from the drop-down list.
3. Click Format and click OK in popup confirmation window.
8.2 Advanced HDD Settings
Purpose:
You can enable/disable overwrite, configure the HDD property, and view the S.M.A.R.T information.
Steps:
1. Select the Hard Disk to configure in the drop-down list.
2. Select Overwrite as Yes or No.
If Overwrite is set as Yes, data would keep writing into the HDD when HDD is full by replacing the previous
data.
3. Select Property as R/W or Redundancy.
R/W: The HDD supports both read and writing operation.
Redundancy: Data would save in the R/W HDD as well as in the redundant HDD. Thus to effectively
enhance the data safety and reliability.
4. To view HDD S.M.A.R.T information, do following steps:
1) Click View of S.M.A.R.T Info.
2) Select Hard Disk to view in the drop-down list.
3) Click Exit to exit the S.M.A.R.T information interface.
5. Click OK to save the settings.
To Next Page
Loading...
Need help?
General
