Rail Network Video Recorder User Manual
59
4. Set the Alarm Duration time.
5. To set Alarm Schedule, do following steps:
1) Click the Set button of Schedule to set the arming schedule for alarm outputs.
Up to 8 time periods can be set within each day. And the time periods can’t be overlapped with each
other.
2) Optionally, you can click Copy to copy the current settings to other days in the week.
Figure 7. 21 Arming Schedule Settings
6. Optionally, you can click Copy to copy the current settings to other alarm output.
7. Click Apply to save the new settings and click OK to exit.
7.6 Firewall Settings
Purpose:
The Rail NVR provides software-based firewall to protect the device against the threats from the public network.
A white list can be set, and only the trusted IP addresses on the white list can access the device via the network.
192.0.0.xxx are set as the default trusted IP addresses.
The IP address of the platform server to add the device is set as the trusted IP address.
Up to 16 IP addresses can be added on the white list.
Steps:
1. Enter the Firewall Settings interface.
Main Menu > Other Settings > Firewall
To Next Page
Loading...
Need help?
General
