HIKVISION DS-TCG227-A Series - Page 63

User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
62
The LED display function can only take effect when adopting the Hikvision
IS-TVL224-4-5EY series LED display.
Steps:
1. Go to Configuration > Device Configuration > Entrances and Exits >
Display.
Figure 6-64 LED Display Configuration
2. Configure the parameters below.
 Display Plate: Enable or disable to display plate on the LED display.
 Display Info: Enter the information to display on the LED display.
Online display content: The platform or client sends the display content, such
as the free parking space(s), charging information, etc.
Offline greetings: You can configure greetings such as Welcome if the device
is offline.
Offline company information: You can configure the company information
such as Hikvision if the device is offline.
 Display Mode: Select the display mode. Leftward, Rightward, and Display
Immediately are selectable.
 Display Speed: Select the display speed of the content. Fast, Medium, and
Slow are selectable.
 Display Duration: Enter the duration ranging from 0 to 60s.
3. Click Save to save the settings.