User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
63
6.10 User Management
Go to Configuration > Device Configuration > User Management.
Figure 6-65 User Management
Adding a User Account
Steps:
1. Click Add to add a user account.
Figure 6-66 Add a User
2. Configure the user parameters.
3. Click OK to save the settings.
STRONG PASSWORD RECOMMENDED–We highly recommend you create
a strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your
product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect
To Next Page
Loading...
