HIKVISION DS-TDSB00-EKT/POE/4M - Chapter 4 Storage; Set SDK Listening; Set ISAPI Listening

Chapter 4 Storage
4.1 Set SDK Listening
The SDK listening can be used to receive the uploaded informaon of the device arming alarm.
Before You Start
The listening service has been enabled for the SDK listening, and the network communicaon with
the device is normal.
Steps
1.
Go to
Conguraon → Network → Data Connecon → SDK Listening .
2.
Check Enable SDK Listening.
3.
Set IP Address/Domain and Port if you need to upload the alarm informaon.
4.
Click Save.
4.2 Set ISAPI Listening
ISAPI listening and SDK listening are mutually exclusive protocols.
Before You Start
The listening service has been enabled for the ISAPI host, and the network communicaon with
the device is normal.
Steps
1.
Go to
Conguraon → Network → Data Connecon → ISAPI Listening .
2.
Check Enable ISAPI Listening.
3.
Set ANPR IP/Domain, ANPR Port, and Host URL.
4.
Click Save.
Fall Detecon Radar User Manual
7