HIKVISION DS-TDSB00-EKT/POE/4M - Connect to Hik-Connect; Set DDNS

5.4.2 Connect to Hik-Connect
The device can be remotely accessed via Hik-Connect.
Before You Start
●
Connect the device to the Internet.
●
Set the IP address, subnet mask, gateway, and DNS server of the LAN.
Steps
1.
Go to
Conguraon → Network → Data Connecon → Hik-Connect Plaorm .
2.
Check Enable.
3.
Select Protocol Version.
4.
Oponal: Check Custom to enter the deployed server IP address.
5.
Use the Hik-Connect mobile client to scan the QR to add the device.
6.
Click Save.
Note
Check the network connecon if the Register Status is Oine.
What to do next
You can access and manage the added device via Hik-Connect.
5.5 Set DDNS
You can use the Dynamic DNS (DDNS) for network access. The dynamic IP address of the device can
be mapped to a domain name resoluon server to realize the network access via domain name.
Before You Start
●
Register the domain name on the DDNS server.
●
Set the LAN IP address, subnet mask, gateway, and DNS server parameters.
●
Complete port mapping. The default ports are 80, 8000, and 554.
Steps
1.
Go to
Conguraon → Network → Network Parameters → DDNS .
2.
Check Enable DDNS.
Fall Detecon Radar User Manual
12