HIKVISION DS-TDSB00-EKT/POE/4M - Import Configuration File; Export Debug File

2.
Click Export aer Conguring Parameters.
3.
Set an encrypon password, conrm the password, and click OK.
Note
The password is used for imporng the conguraon le of the current device to other devices.
4.
Select the saving path, and enter the
le name.
5.
Click Save.
8.10 Import Conguraon File
Import the conguraon le of another device to the current device to set the same parameters.
Before You Start
Save the
conguraon le to the computer.
Steps
Cauon
Imporng conguraon le is only available to the devices of the same model and same version.
1.
Go to Conguraon → System → Maintenance → Upgrade & Maintenance → Advanced
Sengs → Data Import .
2.
Click Browse to select the
conguraon le.
3.
Click Import.
4.
Enter the password which is set when the
conguraon le is exported, and click OK.
5.
Click OK on the popup window.
Result
The parameters will be imported, and the device will reboot.
8.11 Export Debug File
The technicians can export the debug le to troubleshoot and maintain the device.
Steps
1.
Go to Conguraon → System → Maintenance → Upgrade & Maintenance → Data Export .
2.
Click Export
aer Debug File.
3.
Select the saving path, and enter the le name.
4.
Click Save.
Fall Detecon Radar User Manual
25