HIKVISION Hik IP Receiver Pro User Manual

The added devices are displayed on the Device page.
Note
●
If the device supports direct connecon, the device's online status will be displayed as Online
(ISUP).
●
To make sure the device supports direct connecon, you should congure external IP address
and external port beforehand. See
Set Port Mapping for details.
Figure 3-2 Add a Device Managed on Hik-Partner Pro
8.
Oponal: Perform the following operaons as needed.
Edit Device
●
For administrator: for devices connected in Hik-Partner Pro mode, you
can click to view the name and edit the account ID and stream key of
the device. For devices connected in Dual Connecon mode, you can edit
the account ID and view the device name, device ID and device key.
●
For operator: under the condion that you are permied to manage
devices, for devices connected in Hik-Partner Pro mode, you can edit the
account ID and Stream Key. For devices connected in Dual
Connecon
mode, you can edit the account ID and view the device name.
Note
●
Click → View to view the site informaon of the selected device.
●
You can click to view the device key.
●
Stream key is only applicable to encoding and access control devices.
View Manager Click to view all users who can manage the device. If you are an
Administrator user, you can add and delete Operators. You can also refresh
the manager list and search for an operator who manages the device. For
detailed
informaon, see Manage Operators .
Enable Alarm
Service and Set
Zone
Click in the Operaon column to enable receiving alarms and set zones.
See Set Zone for details.
Hik IP Receiver Pro User Manual
7

HIKVISION Hik IP Receiver Pro Specifications

General

Brand	HIKVISION
Model	Hik IP Receiver Pro
Category	Receiver
Language	English