HIKVISION Hik IP Receiver Pro

6.5 Edit Encoding / Access Control Device Events and Device Status
Events
You can edit the informaon of encoding / access control device events and device status events to
keep them the same with the events
congured on the ARC.
Note
The CID code and SIA code should be the same with those congured on the ARC.
On the Automaon Output page, click Event Code to enter the Event page.
On the Encoding Device page, Access Control Device page, and Device Status page, select an event
type and click
to edit the event's CID code, SIA code, and event name.
You can also check Enable Restore Event, and edit the Event Interval, CID Code, SIA Code, and
Descripon.
Click OK to save the sengs.
Hik IP Receiver Pro User Manual
49