Note
If the computer with Hik IP Receiver Pro installed goes into sleep mode, an excepon will occur to
Hik IP Receiver Pro. It is required to disable the sleep mode of your PC to ensure that Hik IP
Receiver Pro works properly.
1.3 What's New
The following shows the changes in Hik IP Receiver Pro V1.7.0.
1. For ISUP5.0 encoding devices:
-
Supports adding encoding devices via ISUP5.0. For details, refer to Add Single ISUP5.0
Device .
-
For ISUP5.0 encoding devices, supports conguring parons (areas), zones, and channels.
-
For ISUP5.0 and HPP encoding devices, supports
seng video vericaon mode. The Plug-In
mode means to verify alarm-related videos via plug-in; The Auto-Download Video mode
means that alarm-related videos will be
automacally downloaded for you to verify them. For
details, refer to Enable Receiving Alarm and Set Paron (Area) .
2. For the device list page, the updates are as follows. For details, refer to
Device Management .
-
Added Not Authencated status to the Alarm Service column. If there are devices with
unauthencated status in the device list, the table header will give an unauthencated ag
indicaon. The Not Authencated status means that the device on Hik-Partner Pro is not
congured with ARC (unbind from ARC), and IP Receiver Pro will connue to forward alarms
from the devices connected by ISUP.
-
Supports sorng serial numbers and ltering devices by connecng mode on the Device List
page. Also, supports displaying 100 and 200 devices on one page.
3. Adds Auto Export. If you enable it,
conguraon les will be exported regularly. For details, refer
to
Export and Import Conguraon File .
4. This version opmizes the UI of adding Hik-Partner Pro devices. For details, refer to Add
Hikvision Device(s) Managed on Hik-Partner Pro .
-
When you add Hik-Partner Pro devices and Hik-Partner Pro is not congured or connected,
there will be redirect link to Hik-Partner Pro
Conguraon page.
-
This version adds a p that devices should be registered to Hik-Connect and congured with
the ARC service on Hik-Partner Pro.
Hik IP Receiver Pro User Manual
2