HIKVISION Hik IP Receiver Pro

Hik IP Receiver Pro
User Manual

HIKVISION Hik IP Receiver Pro Specifications

General

Brand	HIKVISION
Model	Hik IP Receiver Pro
Category	Receiver
Language	English

Summary

Chapter 2 Installation

2.2 Install Hik IP Receiver Pro on Windows

Provides step-by-step instructions for installing the software.

Chapter 3 Device Management

3.1 Add Hikvision Device(s) Managed on Hik-Partner Pro

Guides on integrating Hikvision devices via Hik-Partner Pro.

3.2 Add Single ISUP5.0 Device

3.3 Add ISUP5.0 Devices in a Batch

3.6 Enable Receiving Alarm and Set Partition (Area)

Configures alarm service and partitions for zone management.

Chapter 4 Basic Configuration

4.1 Access Hik-Partner Pro

4.2.1 Change Password for Admin User

4.2.2 Manage Operators

4.2.6 Enable Alarm Monitor and Check Devices Alarms

Activates alarm monitoring and viewing of device alarms.

4.4 Network Settings

4.4.1 Edit Port

Allows modification of default platform and device port numbers.

4.4.3 Set HTTPS

4.4.4 Set Email

Chapter 5 Storage Settings

5.1 Select Storage Disk

5.2 Set Recording Server for Second Video Verification

Configuration of a recording server for video backup and verification.

Chapter 6 Automation Output Management

6.1 Configure Protocol Parameters

Sets up protocol parameters for communication with third-party systems.

6.2 Search History Event

6.2.1 Start Video Verification

Instructions for live view and playback of alarm-related videos.

6.3 Check Event Monitor Logs