Figure 2-4 PTZ Parameter
3.
Set the PTZ camera parameters.
Note
●
All parameters should be the same as the PTZ camera.
●
For the Coaxitron camera/dome connected, you can select the PTZ protocol to UTC
(Coaxitron). Ensure the selected protocol is supported by the connected camera/dome.
●
The AHD and HDCVI cameras support coaxitron control.
●
Selecng Coaxitron protocol will make other parameters unavailable, including baud rate, data
bit, stop bit, parity and
ow control.
4.
Click OK.
Network Video Recorder User Manual
9