Steps
1.
Go to Conguraon → System → Live View → General .
Figure 6-2 Live View-General
2.
Congure the Live View parameters.
Live View Mode
Select the live view window division.
Dwell Time
The me to dwell in a camera before switching to next camera when auto-switch in live view
is enabled.
Event Output
Select the output to show event video.
Full Screen Monitoring Dwell Time
Set the
me to show alarm event image.
Enable Audio Output
Turn on/o audio output for the selected video output.
Volume
Adjust the live view, playback, and two-way audio volume for the selected video output
interface.
3.
Click Apply.
Network Video Recorder User Manual
42
To Next Page
Loading...
