User Manual of Network Video Recorder
53
8.6 Configuring Exceptions
Purpose:
Exception parameters are for the alarm handling of abnormal event, which include “HDD Full”, “HDD Error”
(HDD errors or HDD not initialization), “Network Disconnected”, “IP Address Conflicted”, “Illegal Login” (user
name or password wrong), “Record / Capture Exception” and “Resolution Mismatch”.
Steps:
1. Enter exception configuration interface
Configuration> Remote Configuration> Exception
Figure 8. 9 Exceptions
Table 8. 2 Exception Parameter Descriptions
2. Select the exception type in the drop-down list and set linkage method.
3. Click the Save button to save the settings.
To Next Page
Loading...
Need help?
General
