User Manual of Network Video Recorder
70
9.11 Multicast Address Settings
Purpose:
The multicast can be configured to realize live view for more than 128 connections through network for the device.
A multicast address spans the Class-D IP range of 224.0.0.0 to239.255.255.255. It is recommended to use the IP
address ranging from 239.252.0.0 to 239.255.255.255.
Steps:
1. Enter the Advanced settings interface, as shown in the Figure 9. 17.
Configuration > Remote Configuration > Network Settings > Advanced
2. Set Multicast IP. When adding a device to client software, the multicast address must be the same as the one
of NVR.
3. Click the Save button to save and exit the interface.
Note: The multicast function should be supported by the network switch to which the NVR is connected.
To Next Page
Loading...
