6.1 Sleep Mode
Chapter 6: General Procedures
Page 6 - 10 Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,
Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)
5. Disconnect the battery cable (E) from the control board (F).
6. Make sure the indicator (G) turns off.
7. Connect the battery cable (E) to the control board (F).
The indicator should remain off.
8. Install the six screws (D) to attach the cover (B) to the control box (C).
To Next Page
Loading...
