Hilti DS WS15 User Manual

3
1. General information
The operating instructions must be read carefully
before the equipment is put into operation.
Always keep these operating instructions with the
equipment.
The wire saw system should be handed over to other
persons only complete with the operating instruc-
tions.
Safety notices and their meaning
1.1
Explanation of the pictograms and other
information
1.2
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful infor-
mation.
General warning Warning:
electricity
Warning:
avoid hand injuries
Wear protective
gloves.
Wear safety
footwear.
Wear respiratory
protection.
Wear ear
protection.
Wear eye
protection.
Wear a hard hat.
Warning signs
Obligation signs
Warning:
Risk of cutting
injury
< 4°C
358092
To avoid damage when there is a risk of freezing, the
cooling circuit of the system must be blown out with
compressed air after use.
water in
max 6bar
357824
To avoid damage, do not
exceed a water pressure
of 6 bar.
On the machine
On the control unit
DSW-WG
max 0.3 m
l2
l1
r1 = l1 x 2
r2 = l2 x 2
Return waste
material for
recycling.
Read the operating
instructions before
use.
Symbols
A
Amps
V
Volts Alternating current
∅
Diameter
W
Watts
Hz
Hertz
n
o
Nominal speed
under no load
mm
Millimeters
/min
Revolutions
per minute
rpm
Revolutions
per minute

Hilti DS WS15 Specifications

General

Brand	Hilti
Model	DS WS15
Category	Saw
Language	English