HIMA HIMatrix F3 DIO 8/8 01

F3 DIO 8/8 01 4 Start-up
HI 800 179 E Rev. 2.00 Page 27 of 52
4.1.2 Connecting the Digital Outputs
Use the following terminals to connect the digital outputs:
Terminal Designation Function (outputs, DO)
4 4- Digital output 4- (for increased load)
5 8- Digital output 8- (for increased load)
6 S+ Ground channel group
Terminal Designation Function (outputs, DO+)
7 L- Ground channel group
8 1 Digital output 1
9 2 Digital output 2
10 3 Digital output 3
11 4+ Digital output 4+ (for increased load)
12 L- Ground channel group
Terminal Designation Function (outputs, DO+)
13 L- Ground channel group
14 5 Digital output 5
15 6 Digital output 6
16 7 Digital output 7
17 8+ Digital output 8+ (for increased load)
18 L- Ground channel group
Table 18: Terminal Assignment for the Digital Outputs
4.1.3 Connecting Pulsed Outputs
Terminal Designation Function (non-safe pulsed outputs TO)
1 L- Ground
2 1 Pulsed output 1
3 2 Pulsed output 2
Table 19: Terminal Assignment for the Pulsed Outputs