HIMA HIMatrix F3 DIO 8/8 01 User Manual

F3 DIO 8/8 01 Table of Contents
HI 800 179 E Rev. 2.00 Page 3 of 52
Table of Contents
1
Introduction 5
1.1 Structure and Use of this Manual 5
1.2 Target Audience 6
1.3 Formatting Conventions 7
1.3.1 Safety Notes 7
1.3.2 Operating Tips 8
2 Safety 9
2.1 Intended Use 9
2.1.1 Environmental Requirements 9
2.1.2 ESD Protective Measures 9
2.2 Residual Risk 10
2.3 Safety Precautions 10
2.4 Emergency Information 10
3 Product Description 11
3.1 Safety Function 11
3.1.1 Safety-Related Digital Inputs 11
3.1.1.1 Reaction in the Event of a Fault 12
3.1.1.2 Line Control 12
3.1.2 Safety-Related Digital Outputs 13
3.1.2.1 Line Diagnosis 14
3.1.2.2 Reaction in the Event of a Fault 15
3.1.3 Pulsed Outputs 15
3.2 Equipment, Scope of Delivery 16
3.2.1 IP Address and System ID (SRS) 16
3.3 Type Label 17
3.4 Assembly 18
3.4.1 LED Indicators 19
3.4.1.1 Operating Voltage LED 19
3.4.1.2 System LEDs 19
3.4.1.3 Communication LEDs 20
3.4.1.4 I/O LEDs 20
3.4.2 Communication 21
3.4.2.1 Connections for Ethernet Communication 21
3.4.2.2 Network Ports Used for Ethernet Communication 21
3.4.3 Reset Key 22
3.5 Product Data 23
3.5.1 Product Data F3 DIO 8/8 014 25
3.6 Certified HIMatrix F3 DIO 8/8 01 25
4 Start-up 26
4.1 Installation and Mounting 26
4.1.1 Connecting the Digital Inputs 26

HIMA HIMatrix F3 DIO 8/8 01 Specifications

General

Brand	HIMA
Model	HIMatrix F3 DIO 8/8 01
Category	Controller
Language	English