HIMA HIMatrix F3 DIO 8/8 01 User Manual

Table of Contents F3 DIO 8/8 01
Page 4 of 52 HI 800 179 E Rev. 2.00
4.1.1.1 Surges on Digital Inputs 26
4.1.2 Connecting the Digital Outputs 27
4.1.3 Connecting Pulsed Outputs 27
4.1.4 Cable Plugs 28
4.1.5 Mounting the F3 DIO 8/8 01 in Zone 2 29
4.2 Configuration 30
4.3 Configuration with SILworX 30
4.3.1 Parameters and Error Codes for the Inputs and Outputs 30
4.3.2 Digital Inputs of F3 DIO 8/8 01 31
4.3.2.1 Tab: Module 31
4.3.2.2 Tab: DO 8 LC: Channels 32
4.3.3 Digital Outputs of F3 DIO 8/8 01: DO 2 02 33
4.3.3.1 Tab: Module 33
4.3.3.2 Tab: DO 2 02: DO1 Channels 34
4.3.3.3 Tab: DO 2 02: DO2 Channels 34
4.3.4 Digital Outputs of F3 DIO 8/8 01: DO 2 01 35
4.3.4.1 Tab: Module 35
4.3.4.2 Tab: DO 2 01: DO1 Channels 36
4.4 Configuration with ELOP II Factory 37
4.4.1 Configuring the Inputs and Outputs 37
4.4.2 Signals and Error Codes for the Inputs and Outputs 37
4.4.3 Digital Inputs of F3 DIO 8/8 01 38
4.4.4 Digital Outputs of F3 DIO 8/8 01, DO+ (DO1), DO- (DO2) 39
4.4.5 Pulsed Outputs for F3 DIO 8/8 01 40
5 Operation 41
5.1 Handling 41
5.2 Diagnosis 41
6 Maintenance 42
6.1 Faults 42
6.2 Maintenance Measures 42
6.2.1 Loading the Operating System 42
6.2.2 Proof Test 42
7 Decommissioning 43
8 Transport 44
9 Disposal 45
Appendix 47
Glossary 47
Index of Figures 48
Index of Tables 49
Index 50

HIMA HIMatrix F3 DIO 8/8 01 Specifications

General

Brand	HIMA
Model	HIMatrix F3 DIO 8/8 01
Category	Controller
Language	English