3 Product Description X-AI 32 02
Page 28 of 60 HI 801 055 E Rev. 4.00
The system cable is available in the following standard variants:
System Cable Description Length
X-CA 005 01 8 8 m
X-CA 005 01 15 15 m
X-CA 005 01 30
Coded cable plugs on both sides
30 m
Table 18: Available System Cables X-CA 005
3.7.2 System Cable X-CA 009
The X-CA 003 system cable is used to wire the X-CB 008 05 connector board with field
termination assemblies.
General
Cable LIYCY-TP 58 x 2 x 0.14 mm²
Wire Finely stranded
Average outer diameter (d) approx. 18.3 mm
Minimum bending radius
Fixed laying
Flexible application
5 x d
10 x d
Combustion behavior
Flame resistant and self-extinguishing in
accordance with IEC 60332-1-2, -2-2
Length 8…30 m
Color coding Based on DIN 47100, see Table 16.
Table 19: Cable Data X-CA 009
The system cable is available in the following standard variants:
System Cable Description Length
X-CA 009 01 8 8 m
X-CA 009 01 15 15 m
X-CA 009 01 30
Coded cable plugs on both sides
30 m
Table 20: Available System Cables X-CA 009
3.7.3 Cable Plug Coding
The cable plugs are equipped with three coding pins. Therefore, cable plugs only match
connector boards and FTAs encoded accordingly, see
Figure 7.
To Next Page
Loading...
