4 Start-up X-AI 32 02
Page 40 of 60 HI 801 055 E Rev. 4.00
4.4.4 Submodule Status [DWORD]
Coding of the Submodule Status
Coding Description
0x00000001 Fault in hardware unit (submodule).
0x00000002 Reset of an I/O bus
0x00000004 Faults detected while configuring the hardware
0x00000008 Fault detected while verifying the coefficients
0x10000000 Fault during AD conversion (conversion end)
0x20000000 Faulty operating voltages
0x40000000 Fault during AD conversion (conversion begin)
0x80000000 Test function transmitter monitoring overvoltage
Table 25: Submodule Status [DWORD]
To Next Page
Loading...
