X-AI 32 02 Appendix
HI 801 055 E Rev. 4.00 Page 57 of 60
Index of Tables
Table 1: Additional Relevant Manuals 5
Table 2: Environmental Requirements 8
Table 3: Blinking Frequencies of LEDs 14
Table 4: Module Status Indicators 14
Table 5: System Bus Indicators 15
Table 6: I/O Indicators 15
Table 7: Product Data 16
Table 8: Specifications for the Analog inputs 17
Table 9: Product Data for the Transmitter Supply 17
Table 10: Available Connector Boards 18
Table 11: Connector Boards for High Precision Measurements 18
Table 12: Position der Codierkeile 19
Table 13: Terminal Assignment for Connector Boards with Screw Terminals 22
Table 14: Eigenschaften der Klemmenstecker 22
Table 15: Pin Assignment for the System Cable Plug 24
Table 16: Pin Assignment for the System Cable Plug 26
Table 17: Cable Data X-CA 005 27
Table 18: Available System Cables X-CA 005 28
Table 19: Cable Data X-CA 009 28
Table 20: Available System Cables X-CA 009 28
Table 21: Event Description 34
Table 22: Module Tab in the Hardware Editor 36
Table 23: Tab: I/O Submodule AI32_02 in the Hardware Editor 37
Table 24: Tab: I/O Submodule CI32_02:Channels in the Hardware Editor 39
Table 25: Submodule Status [DWORD] 40
Table 26: Diagnostic Information [DWORD] 41
To Next Page
Loading...
