HIMA HIMax X-AI 32 02 - 4.5.3 Redundant Connection via Two Base Plates

4 Start-up X-AI 32 02
Page 46 of 60 HI 801 055 E Rev. 4.00
4.5.3 Redundant Connection via Two Base Plates
The figure shows the connection of one transmitter if the redundant modules inserted in
different base plates or are not located adjacently in the rack. The instrument shunts are
placed on the field termination assembly.
AI-
S-
S+
AI+
AI_R+
AI-
S-
S+
AI+
AI_R+
System Cable X-CA 009 01 n
Transmitter Supply
Analog Input
Figure 18: Redundant Connection via Two Base Plates