50
―――――――――――――――――――――――――――
Chapter 3 Specifications
――――――――――――――――――――――――
○
Accessory Functions:
Auto-zero adjustment
function
Pressing 0ADJ/RESET once in DC A or
AC+DC A mode.
Zero cancel function
Pressing 0ADJ/RESET once with
holding HOLD
in AC or AC+DC
mode.
Recording
Maximum (MAX), minimum (MIN),
average (AVE) value display selectable
for current, voltage and frequency
measurements
Data hold
Data hold function
Auto power-off
Automatic shutdown after 10.5 1
minutes. Beep tone warning before the
shutdown. Extending and disabling
possible.
Beep tone
ON/OFF
○
Display
LCD panel
Digital counter
2500 counts max. (current)
But 2000 counts at 200 A range
3750 counts max. (voltage)
But 750 counts at 600 V range
1250 counts max. (frequency)
But 1000 counts at 1000 Hz range
Bar graph display
35 segments
Over-range display
"O.L." (bar graph)
Battery low warning
goes on (during which time accuracy
cannot be guaranteed).
Data hold annunciator
HOLD
Auto power-off
annunciator
APS
Units
A, V, Hz
Zero suppression
5 counts
3.2 General Specifications
To Next Page
Loading...
