Hioki 3285 - 2.7 Alteration of Counter Updates; 2.7.1 SLOW mode; 2.7.2 FAST mode

36
―――――――――――――――――――――――――――
Chapter 2 Measurement Procedure
――――――――――――――――――――――――
SLOW PEAK
FAST
(The unit
annunciator blinks.)
Hz
(Except DC)
NORMAL
2.7 Alteration of Counter Updates
2.7.1 SLOW mode
2.7.2 FAST mode
display and the digital display value and bar graph
display are maintained.
The data hold function is available for all
measurements.
To cancel the data hold function, press
HOLD
again.
If you press
RANGE
during the data hold function,
the bar graph display the present range.
The counter is updated twice per second when
powering on. The counter update may be altered
according to measurement conditions.
SLOW/PEAK/Hz
changes an annunciator as
follows:
If the counter fluctuates rapidly and is hard to read,
you can select a slower update rate (once every 3
seconds) by pressing
SLOW/PEAK/Hz
.
･ For current measurements and voltage measurements, the
counter is updated four times per second in FAST mode.
You can measure abrupt changes such as starting currents.
･ The unit symbol A or V blinks.
･ To facilitate reading when measuring a starting
current, use the record (REC) function to hold the
maximum value (MAX).
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com