Hioki 3285 - 3.2 General Specifications

49
―――――――――――――――――――――――――――
Chapter 3 Specifications
――――――――――――――――――――――――
Range
(Accuracy Range)
Resolution
DC,45～66Hz 10～45,66～1kHz
30V(3.0～75.0V) 0.1V ±(1.0%rdg.+7dgt.) ±(1.5%rdg.+7dgt.)
300V(30～750V) 1V ±(1.0%rdg.+7dgt.) ±(1.5%rdg.+7dgt.)
600V(60～1000V) 1V ±(1.0%rdg.+7dgt.) ±(1.5%rdg.+7dgt.)
Range
(Accuracy Range)
Resolution
10Hz(1.00～10.00Hz)
0.01Hz ±(0.3%rdg.+1dgt.)
100Hz(10.0～100.0Hz)
0.1Hz ±(0.3%rdg.+1dgt.)
1000Hz(100～1000Hz)
1Hz ±(1.0%rdg.+1dgt.)
○ Accessory Functions:
Auto-zero adjustment
function
Pressing 0ADJ/RESET once in DC A or
AC+DC A mode.
Zero cancel function Pressing 0ADJ/RESET once with
holding HOLD
in AC or AC+DC
mode.
Recording Maximum (MAX), minimum (MIN),
average (AVE) value display selectable
for current, voltage and frequency
measurements
Data hold Data hold function
Auto power-off Automatic shutdown after 10.5±1
minutes. Beep tone warning before the
shutdown. Extending and disabling
possible.
Beep tone ON/OFF
○ Display LCD panel
Digital counter 2500 counts max. (current)
3750 counts max. (voltage)
1250 counts max. (frequency)
3.2 General Specifications
③ AC+DC voltage V peak (wave peak value)
○ Frequency measurement Hz
Display accuracy
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com