22
Display
1.3 Display
For error displays, see “6.3 Error Display” (p. 99).
Sub display
Main display
1
Communicating with
the PC. (p. 72)
2
Retention of the
measured value.
(p. 60)
3
Continuity check
(p. 47)
Diode (p. 48)
Clamp current
measurement (p. 56)
Maximum value (MAX),
minimum value (MIN), average
value (AVG)
The lter function is
activated. (p. 64)
4
AC, DC
5
AC, DC automatic
judgment
Relative value display
(measurement other than
temperature) (p. 67)
5
• Relative value display
(during temperature
measurement)
• Temperature
difference from the
standard.(p. 68)
6
Battery indicator
(p. 23)
The auto power save
function is activated.
(p. 70)
7
Each unit
(T1, T2) Lights up when
the relative value of the
temperature is displayed.
8
Indication (example): In the case
of 30.00 V input in the 60.00 V
range, the bar is displayed to
the center of the scale.
9
Auto range, manual range (p. 59)
To Next Page
Loading...
