Hioki DT4256 - Installation in Measurement Location; Using the Instrument with the Stand; Attaching the Magnetic Strap

32
Installation in Measurement Location
2.4 Installation in Measurement Location
Using the instrument with the stand
Position the instrument with the stand at the rear.
CAUTION
• Do not position the instrument on an
unstable table or inclined surface.
• When the instrument is set on the stand,
do not apply a strong force above. Doing
so may damage the stand.
Attaching the magnetic strap
Attach the optional Z5004 Magnetic Strap to the instrument and
attach the magnet to the wall surface (with metal plate afxed).
Magnet
Attach it to the wall surface
(with metal plate afxed).
Strap holes