31
Using Test Leads
Removing and attaching the sleeves
Removing the sleeves Attaching the sleeves
Gently hold the bottom of the
sleeves and pull the sleeves off.
Safely store the removed sleeves
so as not to lose them.
Insert the metal pins of the test
leads into the holes of the sleeves,
and rmly push them all the way
in.
Connecting to the instrument
1
2
1
Turn the rotary switch to the desired
measurement function.
2
Connect the test leads to the relevant
measurement terminals.
• Besides the current measurement
(excluding the clamp)
COM terminal Connect the black test lead.
V terminal Connect the red test lead.
• Current measurement
COM terminal Connect the black test lead.
µA/mA terminal
(DT4253)
Connect the red test lead.
A terminal
(DT4252, DT4256)
To Next Page
Loading...
