Hioki DT4256 - Measuring AC Current Using Clamp-On Probe (DT4253, DT4255, DT4256); Probe (DT4253, DT4255, DT4256)

56
Measuring AC Current Using Clamp-on Probe (DT4253, DT4255, DT4256)
3.10 Measuring AC Current Using Clamp-
on Probe
(DT4253, DT4255, DT4256)
The current is measured using our optional clamp-on probe (9010-
50, 9018-50, 9132-50). To connect to this instrument, the 9704
Conversion Adapter is required. Before using the clamp-on probe,
be sure to read the Instruction Manual which accompanies the
optional clamp.
4
1
2
3
5
Set the clamp-on probe and the instrument to the same range.
9704 Conversion Adapter
Clamp-on probe
Change the range in accordance
with the actual measurement.
If the range of the clamp-
on probe is changed during
measurement, change the
range of the instrument as well.
Current
range
4.5 温度交互 2 4.5 画面 1 4.5 画面 2 1.4 の 1
1.4 の２ 1.4 の３ 2.1 3.1 の 1
3.2 の 2、交流電圧、
自動判別（左）、3.3
3.2 直流電圧 自動判別（右） 3.4 導通
3.5 OVER 3.5 ダイオード 3.6 抵抗 3.7 温度
3.8 静電容量 3.9 の DT4253 3.9 の DT4252 3.9 mA% 換算
3.10 3.11 4.1 オートレンジ 4.1
マニュアルレン
ジ