Hioki DT4256 - 4 Using Instrument Conveniently; Selecting the Measurement Range; Measuring with the Auto Range; Measuring with the Manual Range

59
4
Using Instrument Conveniently
4.1 Selecting the Measurement Range
Auto or Manual range can be selected. In the case of measurement
where the desired range can be selected, [RANGE:] lights up at the
bottom of the display.
• Auto range Sets the optimum range automatically in
accordance with the actual measurement.
• Manual range Sets the specic range manually.
(When the relative value (REL) function is enabled, the
range cannot be changed.)
Measuring with the auto range
4.5 温度交互 2 4.5 画面 1 4.5 画面 2 1.4 の 1
1.4 の２ 1.4 の３ 2.1 3.1 の 1
3.2 の 2、交流電圧、
自動判別（左）、3.3
3.2 直流電圧 自動判別（右） 3.4 導通
3.5 OVER 3.5 ダイオード 3.6 抵抗 3.7 温度
3.8 静電容量 3.9 の DT4253 3.9 の DT4252 3.9 mA% 換算
3.10 3.11 4.1 オートレンジ 4.1
マニュアルレン
ジ
[RANGE: AUTO] lights up.
When the measurement function is switched using the rotary
switch, the auto range is enabled.
Measuring with the manual range
4.5 温度交互 2 4.5 画面 1 4.5 画面 2 1.4 の 1
1.4 の２ 1.4 の３ 2.1 3.1 の 1
3.2 の 2、交流電圧、
自動判別（左）、3.3
3.2 直流電圧 自動判別（右） 3.4 導通
3.5 OVER 3.5 ダイオード 3.6 抵抗 3.7 温度
3.8 静電容量 3.9 の DT4253 3.9 の DT4252 3.9 mA% 換算
3.10 3.11 4.1 オートレンジ 4.1
マニュアルレン
ジ
Press .
[RANGE: MANUAL] lights up.
Each time
is pressed, a higher range is
specied. When the key is pressed at the highest
range, the lowest range is specied once again.
Example: When the range is 6.000 V to 1000 V
6.000 V → 60.00 V → 600.0 V → 1000 V → 6.000 V
To switch from the manual range to the auto range, press
for at least 1 second.
4 Using Instrument Conveniently