Hioki DT4256 - Page 81

73
Communicating with PC
Attaching the communication adapter to the instrument
Communication
port
Communication
adapter
USB cable
2
1
1
Attach the
communication
adapter.
2
Connect the
USB cable to the
communication
adapter.
• Connect the cables, being careful to orient each cable correctly.
• During communication,
1
5
6
7
8
9
2
4
3
appears in the display.
• When
1
5
6
7
8
9
2
4
3
is lit, the operation keys of the instrument is
disabled.
• During communication, do not disconnect the USB cable.
Disconnecting the cable stops the communication. In that case,
a warning is displayed by the PC software. Connect the cable
again.
• It is possible to use the instrument while the communication
adapter is attached, however, the communication adapter is
excluded from the drop-proof.